Products Vacuum Valves

piSAVE release

Equalises pressure in the suction cups to provide fast release of the product
Extra fast release by accumulating and utilising the feed-air pressure as a boost
ON/OFF activated simultaneously with the ejector
No additional controls required — use a single 3/2 control valve for the ejector and piSAVE release

Equalizes pressure in vacuum gripper systems to provide fast release of product
Consumes no additional compressed air
ON/OFF activated simultaneously with the ejector
No additional controls required — use a single 3/2 control valve for the pump and AQR

Vacuum flow restrictors which allows a few suction cups to miss the object(s) and still maintain enough vacuum level in the system
Suitable for handling different size sealed sheets/objects with the same flexible lifting device
The vacuum flow restrictors shall be used in a centralized vacuum system, one for each suction cup
Designing with flow restrictors will require a smaller vacuum pump and save energy
Available in three sizes with different flow performance/characteristics to suit different size suction cups
The restrictors are integrated in an Al-fittng with female and male threaded connections to faciliate installation

Independent pneumatic air-saving device for vacuum pumps
Adjustable vacuum controlled 2/2 NO valve
Available with large hysteresis for object handling and small hysteresis for process applications
The Vacustat is recommended for vacuum pumps in non-leaking systems
The vacuum pump must be fitted with a non-return valve

Vacuum check valves which allows a few suction cups to miss the object(s) and still maintain enough vacuum level in the system with quick response and release times
The vacuum check valves shall be used in a centralized vacuum system, one for each suction cup
Designing with vacuum check valves will require a smaller vacuum pump and save energy
Suitable for handling different size or different number of leaking or sealed objects such as MDF boards, corrugated cardboards or metal sheets with a flexible handling device
Also suitable for objects with surface leakage around the lip of the suction cup
The smallest sizes are mainly suitable for sealed and smooth materials, such as metal and glass (02/06 for small cups and 03/60 for large cups)
The valves are supplied separately for integration or mounted in an Al-fitting with female and male threaded connections to facilitate installation

Prevents vacuum from being pulled through the blow-off lines, which means faster response time and completely independent vacuum units
Reliable quick-release function even in larger systems with several units, due to the very low feed pressure required to break away for blow-off
Suitable in applications where cleaning of the suction cup filters or cooling of the object to be picked is important

Check valve that traps vacuum in sealed applications for safe operation
Built-in blow off check valve for fast release of object
Available in lock pin 16, 19 or ball joint mountings, industry standard
Available with level compensator to compensate for differences in level of object

Two-stage COAX® cartridge MINI Pi12-2 integrated
Check valve that traps vacuum in sealed applications for safe operation
Built-in blow off check valve for fast release of object
Available in lock pin 16, 19 or ball joint mountings, industry standard
Available with level compensator to compensate for differences in level of object

Two-stage COAX® cartridge MINI Pi12-2 integrated
Check valve that traps vacuum in sealed applications for safe operation
Built-in blow off check valve for fast release of object
Integrated energy-saving device, Vacustat results in virtually no air consumption in sealed applications
Available in lock pin 16, 19 or ball joint mountings, industry standard
Available with level compensator to compensate for differences in level of object